How do you reset a safe if you forgot the code?

How do you reset a safe if you forgot the code?

Press the reset button on the inner keypad of the safe. It should be a small, black button with the word “Reset” next to it. Push the button with the end of the hanger. You may hear a beeping sound or the control panel may light up when you press the reset button.

How do I change the code on my Phoenix ss0800 safe?

6. Changing the Master code Press ** yellow warning light is on. Input the current master code (011223) and press #. Input your new code and press #, input new code again and press # to confirm.

How do you reprogram a safe keypad?

Changing the Combination on an Electronic Safe Lock

  1. Press the “0” key six times (you will then hear two beeps)
  2. Enter your existing six-digit code (you should then hear two beeps)
  3. Enter your new six-digit code (you will hear one beep)
  4. Re-enter your new six-digit code (you will hear one more beep)

How do I reset my Phoenix safe code?

Safelincs

  1. Press the # button.
  2. Press the green code change button located on the back of the safe door.
  3. Enter your personal 3 to 6 digit code and press # button to set.
  4. The lock will emit a tone and the LCD will display IN. to confirm the new code.

How do you break into a Phoenix safe?

Remove the plastic cap between the handle and the lock. 2. Now take the override keys and put one into the keyway and turn the key clockwise. Now lift the handle and open the safe.

How do you change the 4 digit code on a Schlage keypad lock?

To change the default 4-digit code on a Schlage lock, follow these steps.

  1. Step 1: Find your programming code.
  2. Step 2: Enter your programming code.
  3. Step 3: Press the Schlage and number 1 button simultaneously.
  4. Step 4: Enter your new entry code.
  5. Step 5: Enter your 4-digit code again to confirm.