Are sterling mics any good?
Are sterling mics any good?
It recorded clean and accurate signals and was flattering on all those instruments. On vocals, it was crisp, clear, and full, and its sound was bright but not shrill. Additionally, the mic works well when recording spoken-word material.
Do FET mics need phantom power?
The 48 volts from phantom power is not enough to power a tube effectively, so tube microphones will typically have a separate power supply….Which Microphones Need Phantom Power?
| Microphone Type | Does It Require Phantom Power? |
|---|---|
| True condenser (FET) | Yes |
| True condenser (tube) | No (external power supply) |
| USB | No (USB power) |
Who owns Sterling audio?
Ted Jensen
| Ted Jensen | |
|---|---|
| Born | September 19, 1954 New Haven, Connecticut, U.S. |
| Occupation(s) | Mastering engineer |
| Website | sterling-sound.com/engineers/ted-jensen/ |
Where are sterling mics made?
China
Microphones by Sterling Audio The Sterling mics are manufactured in China. They carry a 1-year warranty.
What does FET mean in microphone?
field-effect transistors
FETs (field-effect transistors) are active electrical devices that use an electric field from a microphone capsule to control a flow of current that ultimately becomes the mic signal. FETs take the high-impedance signal from mic capsules and output a usable and proportional low-impedance signal.
Will phantom power damage my tube mic?
If you are refering to tube microphone power supplies, no phantom power will not damage anything.
What does an audio mastering engineer do?
Mastering engineers use technical expertise and superb ears to make the final adjustments to a piece of recorded music before it’s released, heightening its impact and ensuring that it will translate well to the variety of playback systems in use today.
Do tube mics sound better?
In general, neither is considered to be better than the other. Each possesses its own unique characteristics that make it more (or less) applicable in different circumstances. Customarily, tube mics are associated with warmth and roundness while FET mics are known for their fast transient response and accuracy.
Do tube mics need a preamp?
It’s important to recognize that this first amplification stage happens inside the microphone, and you still need a microphone preamp to raise the output level of a condenser mic up to line level for recording purposes.
Why do tube mics need a power supply?
Power Supply High voltage is applied to the plate or anode, which attracts that flow of electrons. These voltages can’t be generated from the 48-volt phantom power in a mixer or mic preamp, so an external power supply is needed.
Should phantom power be turned on before or after plugging in mic?
As a general rule: Always connect your mic(s) first, before you turn on phantom power. Hot plugging while P48 is already activated can harm your mics. Also, never put anything between your mic and your microphone input. Any device in-between will likely block phantom power and/or degrade the sound quality.
How much should mastering cost?
The cost of music mastering can vary depending on who does it and where you live. In general, you can expect to pay between $50 and $200 for each song if you want to receive a quality end product. When you master an album, 10 tracks will run between $500 and $2,000.