How do I fix FL error on my Samsung washer?
How do I fix FL error on my Samsung washer?
If the door fails to unlock after seven tries once the washer cycle is complete, you’ll get the LO or FL code. Begin by unplugging the washer, and force open the door. Check the wiring connections to the door lock/switch, and tighten if needed.
What does the code FL mean on a Samsung washer?
It is not good if the FL code appears and disappears in Samsung washing machines. It means that the contact disappears somewhere between the hatch lock and the control module path. You will have to remove the lock module. Then, using a multimeter, check the loop on contacts leading from the lock.
What does FL code mean on washer?
Troubleshooting and Repair – Lo FL Error Code – WFW75HEFW. The Whirlpool washer Lo FL error code is displayed when water is not detected entering the washer or it’s not filling the washer fast enough.
How do I reset the code on my Samsung washer?
What you can do instead is power cycle it: Unplug it (or turn off power at the circuit breaker), wait some time for the electrical charge to clear out of the washer (usually 1 to 5 minutes at most), and then power it up again. This is the closest you can get to a “reset” of the washer.
What does lf mean on my Samsung washer?
too long to fill
If F8 E1 or LF (too long to fill) appears in display, the washer is taking too long to fill. It’s possible the drain hose extends more than 4.5″ (114 mm) into standpipe. Check plumbing for correct drain hose installation. Use drain hose form and attach securely to drainpipe or tub.
What does it mean when a washing machine says LF?
If F8 E1 or LF (too long to fill) appears in display, the washer is taking too long to fill. It’s possible the drain hose extends more than 4.5″ (114 mm) into standpipe. Check plumbing for correct drain hose installation.
What does Fl mean on a Maytag Neptune washer?
F8 E1 or LF or LO FL Error Code in the Display of my Maytag Washer. Error Code F8 E1, LF, or LO FL all indicate that no water is detected entering washer after 13 minutes. Depending on your model, you could see any one of these error codes. See your Owner’s Manual for further assistance.
How do you fix LO FL?
The F8 E1 or Lo FL error code means your washer is not detecting the correct amount of incoming water….If code is still displayed:
- Unplug the washer or disconnect the power for one minute.
- Plug in the washer or reconnect the power.
- Re-select the cycle and press Start.
How do I fix the LF on my washing machine?
LF in the display Check the water inlet hoses to be sure they are not clogged or kinked. You may also need to check the screens on the washer water inlet valve. This means shutting off the water supply, and disconnecting the water inlet hoses from the washer.
https://www.youtube.com/watch?v=WnhefXaYKcs