How do I fix hard drive format on Sony Handycam?

How do I fix hard drive format on Sony Handycam?

Please confirm that these are the steps that you performed;

  1. Perform a power reset on the camcorder. Turn off the camcorder. Remove the battery and disconnect the AC power adapter for 60 seconds.
  2. Back up the data from the camcorder on a computer.
  3. Format the camcorder hard drive.
  4. Perform a factory reset on the camcorder .

How do I update my Sony Handycam?

Determine if Your Camera Needs the Update

  1. Power on the camera.
  2. Press the Menu button.
  3. At the Menu screen, select Setup.
  4. At the Setup screen, select Version.
  5. The firmware version is displayed on the LCD screen. Note: If the current firmware version is 2.00 or higher, the camera does not need this update.

How do I format my Sony DCR sr68 hard drive?

Open the hinge screen. 2. Use a pencil, toothpick, or similar instrument to press into the hole that says RESET next to it. If formatting and resetting the camera does not fix the error the HDD should be replaced refer to HDD replacement guide.

How do I connect my old Sony camera to my computer?

You can connect the camera via USB connection using a USB cable.

  1. Use the MENU on the camera to perform the following setting.
  2. Connect the camera to the computer using a USB cable.
  3. On the computer, launch Remote.
  4. In the Device selection window, select a camera to use for Remote Shooting by double clicking.

How do I find my Sony firmware version?

NOTE: Check the Sony® Support website for updates….How to check the firmware version of the camera.

  1. Turn on the camera.
  2. Press the Menu button.
  3. Turn the control dial until Setup is selected.
  4. Press the center of the control dial.
  5. Turn the control dial until Version is selected.
  6. Press the center of the control dial.