How do you mic a 4×12 cabinet?
How do you mic a 4×12 cabinet?
An SM57 placed on-axis at the upper-left speaker’s cap edge.
- Placing the mic CLOSER to the speaker (right up against the cab) will give a faster, more present response.
- Placing the mic closer to the CENTER of the speaker cone yields a grittier, more trebly sound.
What is the Fredman technique?
It consists in using 2 Shure Sm57, one straight to the edge of the dustcap, the other near. The core of the technique is to back off the second microphone until the phase cancellation doesn’t take away only the “fizz”, the annoying high frequences that make our tone sound like a mosquito.
How close should a mic be to an amp?
Typically, a guitar amp is close mic’ed to capture the most direct sound. Placing the microphone roughly 4 inches from the grill and aiming it directly at the center of the speaker will produce the most “edge”. If you move the mic further away, it takes away some of the edge and mellows the sound more.
What are the benefits of close-miking?
Close-miking can provide us with the possibility of a cleaner mix. Furthermore, close-miking can reduce the risk of acoustical feedback when used with public address systems (PA) as less gain of the microphone is needed being so close.
What is ambient miking?
Ambient miking is placing the microphones at such a distance that the room sound is more prominent than the direct signal. This technique is used to capture audience sound or the natural reverberation of a room or concert hall.
What is amp breakup?
It’s a term referring to tube amps (mostly) that when you turn up the volume or gain, it starts getting that natural loud overdrive. That overdrive sound is caused by the clean signal literally breaking up until it becomes more & more distorted.
How do i Improve my Acoustic Guitar Mic quality?
The first has to do with having great microphones and preamps, the second relates to the impact the room itself makes on your audio, and the third is your acoustic guitar mic palcement. If you’re not using the best equipment, you won’t get the best results. Or so it used to be.
Should you close-Mike an acoustic guitar?
One great method is close-miking an acoustic and applying room ambience later creates very effective results from less than perfect sound spaces. If you’re featuring an acoustic guitar, however, consider finding a sonically impressive location and miking the acoustic guitar naturally in that space with the mic at a greater distance from the guitar.
What is the best position to Mic an acoustic guitar?
There is a go-to focal point that serves as the target for almost all acoustic guitar mic techniques. That spot is where the neck and the body come together, usually the 12th or 14th fret, depending on guitar style. The bottom of the neck — the side of the high E-string — is the preferred starting point.
What equipment do I need to record rhythm guitar tracks?
This range gives adequate headroom for intense transients while keeping the soft passages on top of the noise. Compressors, gates and expanders are fine for rhythm guitar tracks that will be buried in band mixes, but these have a way of sounding unnatural and interfering with the recording of a solo acoustic or within a small ensemble.