What axle does a 2010 Jeep Wrangler have?

What axle does a 2010 Jeep Wrangler have?

Drivetrain & Axles

MODEL DRIVETRAIN FRONT AXLE
Sport 4×4 DANA 30 (181 mm)
Sahara 4×4 DANA 30 (181 mm)
Rubicon 4×4 DANA 44 (216 mm)

What are the axles on JK Jeep 2010?

Moving on to the JK Wrangler edition (2007-18), original owners have front Dana 30 axles except for those with a Rubicon trim level as these, again, are front and rear Dana 44s.

What axle do I have in my Jeep?

What Axles Do I Have in My Jeep? Identifying the axles in YJs is pretty simple since there were no options for it. Every YJ came with a Dana 30 up front and a Dana 35 in the rear. TJ Wranglers will have either a Dana 30 in the front and a Dana 35 in the rear unless you have a Rubicon model.

What gear ratio does a 2010 Jeep Wrangler have?

The 2010 Jeep Wrangler Rubicon model is equipped with an Off-Road Rock-TracĀ® NV241 two-speed transfer case with a 4.0:1 low-range gear ratio, as well as electric front- and rear-axle lockers, an electronic sway-bar disconnect and 32-inch off-road tires.

How do I find the axle ratio on my Jeep Wrangler?

So an easy way to determine your actual gear ratio is to check the tag attached to the differential cover by the cover bolts. On the tag there should be some numbering such as 3.54 or 3.73, either of those numbers will give you the stock axle ratio.

What is the stock gear ratio in Jeep Wrangler JK?

Jeep 2007-2011 Wrangler Unlimited JK Specifications

Availability Standard
6th 0.84
Reverse 4.06
Axle Ratio 3.21 Std., 4.10 Opt. (Std. on Rubicon)
Overall Top Gear 2.69 Std., 3.44 Opt. (Std. on Rubicon)

What transmission is in 2010 Jeep Wrangler?

4-speed automatic
6-speed manual
2010 Jeep Wrangler/Transmission

Recent Posts

Categories