What can you cast with Delft Clay?

What can you cast with Delft Clay?

Once you have cast your piece, the Delft Clay can be re-used. Since this is a cold-molding process, molds can be made from patterns composed of wood, wax, epoxy, plastics, and, of course, metal. Because this is a type of sand casting, it is best suited to producing castings without pronounced undercuts.

Can you reuse Delft Clay?

Delft Clay is much finer than casting sand, providing remarkably sharp and highly detailed castings in gold, silver, copper-based alloys, pewter, etc. ✅ Castings require very little finishing work. Once you have cast your piece, the Delft Clay can be re-used.

What is Delft Clay?

The Delft Clay Method is a highly refined form of sand casting that substitutes genuine Delft Clay from Holland for ordinary casting sand. Reproduce your original models quickly with this unique Delft™ clay casting system.

What is Delft clay used for?

The Delft Clay method of casting is a form of sand casting. It makes it possible to make remarkably sharp castings of many objects in gold, silver, and other metals. After casting, the Delft clay can be re-used immediately.

How do you make Delft clay?

Technique: Delft Clay Casting

  1. Step 1 – Preparing the clay.
  2. Step 2 – Preparing the lower mould.
  3. Step 3 – Powder the mould.
  4. Step 4 – Create the upper mould.
  5. Step 5 – Open the mould and remove the model.
  6. Step 6 – Cut the pouring hole and air vents into the clay.
  7. Step 7 -Assemble the mould and pour in the molten metal.

What is Petrobond?

– Petrobond is a formulated bonding agent, bonding sand with oil instead of water. – Less gas is formed permitting use of finer sands with lower permeability. Petrobond gives a finer finish. – Petrobond produces near die cast quality casting with green sand practice.

Can you cast wax in Delft clay?

What I also like about Delft clay casting is that it’s quite possible to cast a very rough wax, cast it and then finish the metal result off and that metal model becomes the master for the rest. Metal masters are much nicer because you can bash them harder into the sand than wax.

What is Petrobond sand?

How do you make greensand casting?

To makegreen sand or like it also called molding sand (foundry sand) we need 3 ingredients: sand, clay and water.

  1. Step 1: Digging Clay. Buy or dig some clay.
  2. Step 2: Find Some Sand. Buy or dig sand.
  3. Step 3: Make Clay Into Fine.
  4. Step 4: Formula.
  5. Finally mix sand with clay.
  6. 16 Comments.