What is DTM acrylic coating?

What is DTM acrylic coating?

DTM Acrylic coATing is a 100% acrylic, water reducible, corro- sion resistant coating for light to moderate industrial use. Designed for new construction or maintenance use and can be used directly over prepared substrates. • Chemical resistant. • Corrosion resistant. • Fast dry.

Is DTM acrylic coating water based?

Pro Industrial DTM Acrylic coating is an interior-exterior, water based, corrosion resistant acrylic coating for light to moderate industrial use.

What is a DTM coating?

Direct-To-Metal (DTM) is a type of paint or coating used on metal surfaces. Direct-To-Metal coatings, as the name implies, are applied directly onto a metal substrate without the use of a primer beforehand.

Does DTM cover rust?

Besides providing an architecturally pleasing finish to metal structures, another appeal of DTM paints includes protecting metal from rust and corrosion.

How do you use DTM acrylic coating?

Application: Stir product thoroughly before applying. O’Leary DTM Acrylics can be applied by brush, roller, air-atomized or airless spray at up to 425 sq ft per gallon. Apply these coatings when material, air and surface temperatures are between 55°F and 100°F.

How do you apply acrylic DTM coating?

  1. Scrape off large rust spots with a wire brush.
  2. Scrub off smaller rust deposits with a scouring pad.
  3. Wash the surface with soap, water and a rag.
  4. Lay plastic sheets and painter’s tape over nearby items.
  5. Spray DTM paint onto the surface with an airless spray gun.

Can you put DTM on wood?

ByBrittney. A tough waterborne acrylic enamel that fights rust on metal, Acrylic DTM Enamel is a smooth, durable finish on wood, drywall, and masonry substrates.

Can you roll on DTM paint?

DTM Acrylic Coating This high-performance product offers excellent weathering properties, moisture resistance, corrosion and flash rust resistance. It’s resistant to stains and to most commercial cleaners, and is easy to apply by brush, roll or spray.

Is DTM paint water based?

Rust-Oleum 3800 System DTM Acrylic Enamel is a fast dry, water-based finish for indoor or outdoor direct-to-metal (DTM) applications. It delivers excellent corrosion resistance and will protect surfaces exposed to mild to moderate environments.

What do you thin DTM paint with?

For airless spray application, thin material up to 10% with clean water. Do not apply DTM Acrylic Finishes if rain is threatening. If heavy night dew is forecast, stop painting at least 6 hours before dew point is achieved. DTM Acrylics will dry to the touch in 30 minutes and may be re-coated in 2 hours.

Does DTM paint need primer?

DTM paint is usually made with acrylic resin, and it is formulated for use on unprimed metal. Because you don’t need to worry about primer, using DTM paint is faster than painting with a traditional acrylic paint.