What type of laser is best for cutting through metal?

What type of laser is best for cutting through metal?

Fiber Laser Fiber lasers are ideal for cutting reflective metals because of their small spot size.

Can a laser machine cut metal?

Most kinds of metal can be cut with a laser cutter. Steel and iron are the most popular metals cut in this way. The thickness of the metal will depend on the size of the laser cutter, but some can work with thicknesses of up to 30mm.

What machine do I need to cut metal?

An angle grinder fitted with an abrasive metal-cutting disc works well to cut all kinds of metal, including bolts, angle iron, rebar and even sheet metal. But the discs wear down quickly, cut slowly and shrink in diameter as you use them. Instead, we recommend using a diamond blade that’s rated to cut ferrous metal.

What size of laser do you need to cut metal?

Some of the most common laser wattages to encounter are 3,500, 4,000 and 6,000. Lasers of 6,000 watts are excellent for cutting through especially thick or strong metals, though in many cases the lower wattages are more than enough to get the job done.

How thick of metal can a laser cut?

The maximum cutting thickness of different materials by 1000W fiber laser cutting machine: the maximum thickness of carbon steel is 10mm; the maximum thickness of stainless steel is 5mm; the maximum thickness of aluminum plate is 3mm; the maximum thickness of copper plate is 3mm; 3.

How much does a metal cutting machine cost?

A fiber laser metal cutting machine cost is from $24,000.00 to $260,000.00. A CO2 laser metal cutting machine cost is from $8,000 to $20,000.00.

How much does it cost to buy a laser cutter?

However, high wattage laser cutting machines are usually a lot more expensive than entry-level units. You can pay anywhere from $4,000 to $15,000 for some laser cutter models.

How accurate is laser cut steel?

How accurate is laser cutting today? The short answer is very accurate. Today, cut width can be extremely small with laser cutting (less than 0.0001 inch) whilst dimensional accuracy is almost as precise (at approximately ± 0.0005 inch).

Recent Posts