Why do my headlights not work but my brights do?
Why do my headlights not work but my brights do?
Headlight Fuse or Relay If a headlight fuse blows, it could cause the headlights to stop working. Most headlight systems are also designed with a relay that switches the power between low beam and high beam headlights. If this relay goes bad, it could allow power to the high beams, but not the low beams.
Why do my headlights only work on bright?
Most headlight failures that are limited to just high or low beams are related to a relay or the high beam control switch. Headlights work but seem dim. The cause: Foggy lenses, worn out bulbs, or a charging system issue. The fix: Clean the lenses, replace the bulbs, or repair the charging system.
Why is my low beam not working?
Blown Fuse If your headlights have stopped working, locate the fuse in your car connected to the low-beam headlights circuit. The fuse box is typically located under the hood or behind the dashboard. You can often find this information in your owner’s manual or on the inside of the fuse box cover.
How much does it cost to fix headlight wiring?
The wiring may be damaged over a period of time. It can cost you $100 per hour. The reason behind the problem may be a faulty headlight switch. Often times, if the headlight works only on high beam or low beam, the dimmer switch may have broken.
How do you check a headlight circuit?
How to Check That Power is Getting to the Headlights: Use a Test Light
- Unplug the light bulb electrical connector.
- Turn on the headlights.
- Connect your test light to a good ground and touch the test light probe to the power side of the connector terminal.
Can a bad fuse cause dim headlights?
In most vehicles, this includes a wiring harness and a fuse. These components provide the power needed to fuel your headlights. Wiring troubles can cause your headlights to dim, misfire, or stop working entirely.
Why are my low beams so dim?
Most DIYers think they’ve got a bad headlight switch or a bad connection in the power feed. But most dim headlights are caused by a corroded ground wire. Just trace the wiring harness from the back of each headlight assembly and see where it connects to the vehicle body. Clean it as described in the photo.