Why is my Hyundai Santa Fe not starting?

Why is my Hyundai Santa Fe not starting?

The most common reasons a Hyundai Santa Fe won’t start are a dead battery, an alternator problem, or failed starter.

What is limp mode Santa Fe?

Also known as ‘limp home mode’, limp mode is a security feature in cars which activates when the engine or transmission control unit picks up a fault. Once it detects a problem, limp mode will cause the less important parts of the car, such as air conditioning, to switch off, and the speed of the car will be reduced.

How do you get a car out of limp mode?

How to get a car out of limp mode? If your vehicle goes in limp mode while driving, find a safe place to stop and restart the engine. Allow the car to stay completely off for at least one minute before you restart it. In many cases, an engine restart will reset the limp mode and allow the vehicle to operate normally.

How do I reset my Hyundai Immobiliser?

To reset the immobilizer, hold down the panic button. Wait for ten minutes if you push the lock button two times.

When I turn the key my car won’t start?

If you turn the key and can hear the starter motor trying to turn the engine over, the lack of power is likely caused by electrical issues such as a weak battery, dirty battery terminals or a worn starter motor.

Can you bypass limp mode?

All you have to do is waiting for about half an hour before you reconnect it. The underlying step is likely to reset the transmission memory on the whole. Once you restart the car after effective reconnecting, the limp mode would deactivate on its own.

What does it mean when your car says engine failsafe mode?

The failsafe mode is a feature added by Jaguar to reduce the risk that system failures can pose to a vehicle. When a system failure happens and failsafe mode is activated by the computer, some of the vehicle’s features will become limited, and the speed of the car will be reduced.

How do I get my Hyundai out of anti-theft mode?

Step 1: Insert the key into the door lock. Use the side door on the driver’s side and the physical key even if there is a keyless entry system on the car. Step 2: Turn the vehicle key to unlock the car door without releasing it. Hold the key for 30 seconds in the position.