Why is my T-Mobile booster not working?
Why is my T-Mobile booster not working?
Make sure the device is in a 3G / 4G coverage area. If not, your location doesn’t have any signal to boost. Unplug the power adapter from both units, wait a few minutes and then plug them in. Test your phone without LTE enabled.
How do I update my T-Mobile Personal CellSpot?
Cellspot Wi-Fi Router To automatically check for updates, choose Check. To manually install an update, choose Choose File. Choose the update file, and then Upload. You can download these files from http://www.asus.com/support Start the firmware installation.
How long does T-Mobile CellSpot take to set up?
2 hours
After you power on your CellSpot, the CellSpot will go through a self-installation process. During this process, the power LED will be in flashing green as the device downloads the latest software and performs device location verification. It can take up to 2 hours to complete the device setup.
How do I reset my T-Mobile Personal CellSpot?
Unplug the 4G LTE CellSpot, wait 5 seconds and plug it back in. Press and hold the reset button for 30 seconds. The device will reset and update its software. If that doesn’t help, contact us.
Why did my signal booster stop working?
If an antenna cable or the power cable has slipped out of the back of antenna or the booster respectively, this will cause the device to stop working properly. When connecting the power, ensure that the power adapter is plugged all the way in into the devices to minimize the risk of this happening.
Does T-Mobile CellSpot need Internet?
CellSpot overview Your phone or device connects to the CellSpot over 3G, 4G, or 4G LTE, and your usage is billed to your account the same as your usage of the larger T-Mobile cellular network. You don’t need any indoor signal at home or Wi-Fi.
How do I connect to my CellSpot router?
Connect your phone to the router
- On your phone, turn on Wi-Fi (If you need steps, find your phone on the Devices page).
- Select one of the T-Mobile Wi-Fi networks: CellSpot_2.
- Enter the password on the white sticker on the back of your router.
- Update the network name and password on your computers, tablets, etc.
Why isn’t my T-Mobile LTE working?
If T-Mobile is not working, your connection might be facing LTE issues due to data limitations, low coverage, or 4G compatibility issues. To fix the problem, try re-inserting your SIM card, activate/deactivate airplane mode, set up an APN, or change the network settings.
Why is my T-Mobile CellSpot not working?
Software did not load properly. Unplug the 4G LTE CellSpot, wait 5 seconds and plug it back in. Press and hold the reset button for 30 seconds. The device will reset and update its software. If that doesn’t help, contact us.
How do I reset my signal booster?
No matter which booster you have, rebooting is easy. Just pull the power plug. Wait 30 seconds, then plug it back in.