What is NP1 caulking used for?

What is NP1 caulking used for?

NP1 and NP1 are designed for sealing / caulking all types of active exterior construction joints. NP1 caulk sealant requires no mixing and bonds to most construction materials without a primer, including concrete, masonry, wood and most metals.

How long before NP1 gets wet?

As long as the surface to which you are applying the Np-1 is completely dry, you can apply this product. If you think it will rain within 1 or 2 hours after application… wait.

How long does it take for MasterSeal NP 1 to dry?

Skins overnight and fully cures within a week. Dries smooth and is paintable. Under ideal conditions: Skins over (24 hrs), Functional (3 days), Full Cure (5-7 days).

Is MasterSeal NP 1 waterproof?

NP1 isn’t merely water-tight, it can be fully submerged in water without losing its grip or seal. While not recommended for applications that will remain permanently submerged, it can resist even the most powerful sources of water.

How strong is NP1?

With 800% elongation, 350 psi tensile and +/- 35% joint movement capability, NP-1 handles most every exterior application up to 1-1/2 inch wide. NP-1 requires no mixing and typically bonds to many materials without a primer, including concrete and masonry. NP1 dries with a smooth finish and is paintable.

Is Master Seal NP1 self-leveling?

MasterSeal SL 1 (formerly known as Sonolastic SL 1) is a one-component, non-priming, elastomeric, self-leveling polyurethane sealant designed for expansion joints in concrete floors and decks. Recommended uses: Horizontal. Interior and exterior.

How long does NP1 caulk last?

SHeLf Life cartridges and ProPaks: 1 year when properly stored.

How do you remove NP1 caulk?

How to Remove NP-1 Caulk

  1. Run a putty knife along the right and left seams of the bead of caulk to loosen the caulk from the surface.
  2. Slide the edge of the putty knife under the bead of loosened caulking material, and lift it up from the surface, sliding and lifting as far along as you can until the seam of caulk breaks.

What does NP1 stand for?

NP1

Acronym Definition
NP1 Neuronal Pentraxin 1

What removes NP1?

How to Remove NP-1 Caulk

  • Run a putty knife along the right and left seams of the bead of caulk to loosen the caulk from the surface.
  • Slide the edge of the putty knife under the bead of loosened caulking material, and lift it up from the surface, sliding and lifting as far along as you can until the seam of caulk breaks.

Who makes NP1 sealant?

BASF NP1
BASF NP1 121.2-oz Tan Paintable Advanced Sealant Caulk.

Recent Posts

Categories